TOPDON BT200 12V 24V Car Battery Load Tester Charging System Analyser 2000CCA
Designed for 12V and 24V Batteries
TOPDON BT200 car battery diagnostic tester can work on all 12V and 24V 100-2000 CCA batteries including regular flooded, AGM flat plate, AGM spiral, as well as GEL batteries, with multiple applications for a broad array of vehicles, Such as a car, truck, marine, boat, motorcycles and more.
Displays accurate test results in seconds, including the battery test, the health status test, and the diagnosis of both starting and charging systems, cranking test, charging test, and other functions.
For the cranking test, this 12V 24V battery tester will display the cranking voltage and the cranking time in milliseconds to check if the electrical system is getting enough power to start the engine.
Work on a wide variety of 12V 24V automotive lead-acid batteries: 100~2000CCA Regular Flooded, AGM Flat / Spiral, GEL, and EFB.
Help detect the failure of starting and charging systems in 12V 24V cars, motorcycles, trucks, RVs, ATVs, boats, yachts, and even lawnmowers.
Multiple rating systems are covered: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, and GB.
Display SOH (State of Health), SOC (State of Charge), Voltage, Current, Rating, and the readable analysis results on the 2.4-inch color LCD screen.
State of health (SoH) is a figure of merit of the condition of a battery (or a cell, or a battery pack), compared to its ideal conditions.
State of charge (SoC) is the level of charge of an electric battery relative to its capacity, SoC is normally used when discussing the current state of a battery in use
The cranking test helps you analyse the starting motor including cranking voltage and the cranking time to check the starting motor works properly or not.
Loaded Voltage means the voltage measured when turning on on-board electrical appliances, such as headlights.
Unloaded Voltage means the voltage measured when turning off all the on-board electrical appliances.
Test different parts of the charging system, including the alternator, rectifier, rectifier diode, and so on for a reliable charging volt value.
Color LCD Screen
BT200 battery tester with 2.4-inch color LCD screen is eye-friendly and easy to read. Provides you with a more comfortable visual experience at every inspection.
Get Accurate Results in Seconds
High precision amplifier and calibrated by professional instruments give you reliable results in seconds!
Easy to Use
Even a beginner can use this battery tester to analyze any 12V & 24V batteries easily, gets everything about the battery, such as voltage, charge, cranking power.
In -Vehicle & Out-of-Vehicle
Support both in-vehicle and out-of-vehicle tests, no need to remove the battery from the vehicle.
No afraid of extreme weather, TOPDON BT200 battery tester working temperature: -20°C~65°C (-4°F~140°F), storage temperature: -20°C~70°C (-4°F~158°F).
Support Multiple Languages
Test results based on JIS, EN, DIN, SAE, and IEC Standards, support multiple languages, English, Russian, Spanish, French, Italian, German.