AUTOOL X60 Heads Up Display Trip Computer | OBD2 Reader

The AUTOOL  X60 HUD with onboard diagnostics 

-Display and monitor vehicle battery voltage, generator charging voltage, Fuel consumption, KMPH, MPH, Coolant temp, offering vehicle over speed alarm, high engine temperature alarm and you can monitor live data streams and read and clear engine fault codes. 

1) LCD Display - Displays menu and test result.
 2) M Key - Go back to main menu.
 3) + Key - Moves up in menu and sub-menu items.
 4) - Key - Scroll down in the menu and sub-menu items.
 5) OK Key - Confirm a selection (or action) from a menu.
 6) Light sensor - automatic light sensor and adjustment on
screen according to the change of environment.

 7) OBD II Connector - Connects the device to the vehicle’s Data
Link Connector (DLC).

 8) USB Connector - Connects the device to the PC for printing or upgrading.

Multi-functional display
Speed, Water Temperature, Voltage, Average Speed, Fuel Consumption, Average Fuel Consumption, Travel Distance, Over Speed Set, OBD Diagnose

Reading Codes

1) Reading Codes can be done with the key on engine off (KOEO) or with the key on engine running (KOER)

2) Stored Codes are also known as “hard codes”, which are fault/trouble codes that have been stored in the vehicle computer memory. The Stored Codes will cause the control module to illuminate the MIL when emission-related fault occurs.

3) Pending Codes are also referred to as “maturing codes” or “continuous monitor codes”. They will not turn on the MIL. If the fault does not occur within a certain number of warm-up cycles, the code clears from memory.

4) Permanent Codes are DTCs that are “confirmed” and are retained in the non-volatile memory of the computer. Permanent DTC shall be stored in non-volatile memory and may not be cleared by any diagnostic services or by disconnecting power to ECU.
Erasing Codes Erasing Code shall be done when the engine is off. Do not start the engine.

Free Shipping 

After sales support 

Product will come with a one year warranty